Products
0102030405
Description & Introduction
Precision laser trimming system designed for the resistive linear displacement sensor market. It allows for both linearity and absolute resistance value adjustments, making it ideal for laser trimming of precision potentiometers (conductive plastic/ceramic), displacement sensors, and similar products.
Key Features
Trim Linear Software: Advanced software for angle-specific, manual, and customizable trimming.
Proprietary Technology: Combines patented laser trimming technology for ease of operation and powerful functionality.
Measurement Capabilities: Includes clearance and symmetry measurements for precise technical requirements.
Specifications
| Model | TS4410D-L1000 | TS4410F-L300 | TS4410F-C50 |
| Processing Products | Linear Displacement Sensor | Potentiometer/Circular Displacement Sensor | |
| Processing Size | L=25～1000 | L=20～300 | Φ=10-70 |
| Independent linearity | 25: ≤±0.2%
50-100: ≤±0.1% 125-1000: ≤±0.05% (mm) |
20: ≤±0.25%
50-100: ≤±0.2% 100-300: ≤±0.1% (mm) |
10-25: ≤±0.15%
25-70: ≤±0.1% (mm) |
| Target Trim precision | ±0.2% | ||
| Measuring System | Measuring Range: 100Ω-500KΩ | ||
| Measuring Precision: Medium Trim: 0.02% High Trim(＞160K): 0.04% | |||
| Software O/S | WIN7/10 | ||
| Power Supply | 110V/220V 50HZ/60HZ | ||
| Gas Pressure | 0.4-0.6Mpa | ||
| Operation Temperature | 24±4℃ | ||
| Dimension | 1182*902*1510mm | ||
| Note: Independent linearity may be influenced slightly by material and the initial linearity. Parameter above can not be used as the equipment acceptance standard. | |||
Maintenance Points & Safety Precautions +
Maintenance Points
▪ Regular cleaning: Keep the laser head and optical components clean to avoid dust affecting the engraving accuracy.
▪ Check key components: Check the laser, cooling system and mechanical components regularly to ensure their proper operation.
▪ Calibration and Adjustment: Calibrate the laser head and sensors regularly to ensure measurement and engraving accuracy.
▪ Environmental control: Avoid operating in humid or dusty environments to prevent equipment damage.
▪ Avoid over-range use: Do not exceed the specified range of the sensor to avoid damage to the sensor.
Safety Precautions
▪ Protective equipment: Laser protective glasses must be worn during operation.
▪ Avoid direct sunlight: Avoid exposing the device to sunlight, high temperatures may affect performance.
▪ Signal Transmission: Ensure that the sensor's signal transmission cable is connected reliably to avoid signal degradation.
▪ Avoid vibration and interference: The sensor should be installed away from sources of vibration and interference.